Skip to main content

Posts

Showing posts from July, 2019

DIY Table Legs with PVC for Under $5

I now have two pieces of IKEA Lerberg table legs. It's a great product and has a minimalist design. But the price was about $20 each. My pocket is not deep enough, so I decided to make a similar structure but with cheaper materials. Half inch PVC pipes come in rescue. The total cost for the entire project is about IDR 65,000 or still under 5 dollars.


For this DIY project, we need to make two table legs. Each leg needs:

1 x 21.5 cm: middle leg (bottom)
1 x 18.3 cm: middle segment
2 x 17.8 cm: lower legs (right and left)
4 x 10.9 cm: this depends on your top table's width
2 x 47 cm: upper legs (right and left)
1 x 43.9 cm: middle leg (upper)
5 x T-shape fittings
2 x L-shape fittings


Each leg needs about 2.6 metres so in total we need ~5.2 metres. That means 2 x 4 metres half inch pipes. Each 4 m pipe costs about IDR 18,000. Each fitting costs about IDR 2,000. We also need an iron saw. I get one for about IDR 5,000, but I am a little bit disappointed about the quality. The IDR 20…